Recruitment of various post in MSME TECHNOLOGY CENTRE, ROHTAK (A Govt. of India Society & Autonomous Body under MSME)

MSME TECHNOLOGY CENTRE, ROHTAK

(A Govt. of India Society & Autonomous Body under MSME) 

Ministry of Micro, Small & Medium Enterprises

MSME Technology Centre, Rohtak has been set up at Rohtak (Haryana). The Technology Centre is a Govt. of India Society registered under Societies Registration Act and is functioning as Autonomous Body under DC-MSME. Applications are invited for the below mentioned posts on Contract Basis for a period of 5 years initially with further extension based on review of performance till superannuation:-

Age relaxable upto 5 years for SC/ST/Internal Candidates & 3 years for OBC candidates. Reservation in posts for PH candidates as per Govt. Rules. 

QUALIFICATIONS & EXPERIENCE:

SR. NO.1-MANAGER (MAINTENANCE)

Qualification : Essential : Degree in Engineering (Mechanical/Production/Electrical/Electronics/Mechatronics/Automobile) or  equivalent from  recognized University/Institution.  Desirable : PG in  Engineering (Mechanical/Production/Electrical/ Electronics/Mechatronics) or equivalent from recognised Institution.

Experience : Essential : 5 years experience in Maintenance Department of a Tool room/reputed Engineering Industry out of which 3 years in responsible position. Preferable : Practical experience in preventive maintenance of sophisticated Tool Room including CNC machines. Experience in use of computerized maintenance system and operation of CNC machines.

SR. NO.2-MANAGER (H/T)

Qualification : Essential : Degree in Engineering (Metallurgy/Mechanical) or equivalent from recognized University/ Institution. Desirable: PG/PG Diploma in Metallurgy or equivalent.

Experience : Essential : 5 years' Experience in Heat Treatment of Engineering Products including Tool steels in reputed Engineering Industry/Institute. Preferable : Experience in use of Vacuum Heat Treatment of Engineering Products. Knowledge in material testing equipment.

SR. NO.3-MANAGER (DESIGN)

Qualification : Essential : Degree in Engineering (Mechanical/Production/Mfg. Technology/Mechatronics/Automobile) or

equivalent   from   recognized   University/lnstitution.   Desirable   :   PG/PG   Diploma   in   Tool Design/Tool   Production/ Management / Masters in Design or equivalent from Recognized Institution.

Experience  :  Essential  :  5  years  in  Production/Design  Department  of  Tool  Room/reputed  Engineering  Industry/

Organization out of which 3 years in responsible Technical/Management position. Preferable : Experience in Design of Tool, Moulds and Press Tools etc. Experience in use of CAD/CAM/CAE/CNC Technology for Tool Design and/or Production. Expericence in AR/VR/AI.

SR. NO.4-MANAGER (MARKETING)

Qualification : Essential : Degree in Engineering (Mechanical/Production/Manufacturing Technology/Mechatronics/ Automobile) or equivalent from recognized University/Institute. Desirable : PG Diploma in Tool Design/Marketing/ Management/PGDBM/MBA or equivalent from recognized Institution.

Experience : Essential : 5 years’ experience in Marketing of Engg. Products/Training Deptt./Production/Design Deptt. of a

Tool Room/reputed Engineering Industry out of which 3 years in responsible technical/Management position.

Preferable  :  Experience  in  providing  technical  training/consultancy  in  product  development  or  production/Design experience in marketing/sale of Engineering product/tools.

SR. NO.5-ASSISTANT MANAGER (ADMIN AND ACCOUNTS)

Qualification : Essential : Commerce Graduate or any Graduate with Law/MBA/PGDBM or CA/ICWA or equivalent from  a recognized  University/Institute.   Desirable  :   Post-Graduation  Degree/Diploma  in  PM/HRD/SAS  or  equivalent  from recognized University/Institution.

Experience : Essential : 5 years’ experience in General Administration/Personnel/Accounts in a reputed manufacturing/ Govt. organization. Should be conversant with Govt. Rules & Regulations on the subject. Experience in Computer Application/ MS Office/Accounting Software. Preferable : Experience in using ERP packages/GST complaint Accounting Software.

SR. NO.6-PURCHASE OFFICER

Qualification : Essential :   Degree in Commerce from recognized University. Desirable : PG in Commerce/Diploma in

Material Management/ERP/MBA.

Experience : Essential : 3 years’ experience in Material Management, purchase order processing, Inventory Management, Bill of materials/Vendor Development etc. Preferable : Experience in Store Accounting, Budgeting and Taxation/Export/ Import documentation/Computerized Accounting/ERP/Inventory Control of item used in Tool Production/Engineering Industry.

SR. NO.7-STORES OFFICER

Qualification : Essential : Degree in Commerce from a recognised University. Desirable : Post Graduate in Commerce/ Diploma in Material Management. 

Experience : Essential : 3 years’ experience in inventory management in a tool room/engineering organization. Preferable :

Store Accounting/Computerized store accounting/cost accounting using ERP in Tool Production/Engineering industry.

SR. NO.8-ENGINEER (PRODUCTION)

Qualification : Essential : Degree in Engineering (Mechanical/Production/Manufacturing Technology/Mechatronics/Automobile) or equivalent from recognized University/Institution. Desirable : PGD in Tool Design/Production/CAD/CAM/CAE/Mechatronics or equivalent from recognized University/Institution.

Experience : Essential :  Nil. Preferable : Experience in Tool Production involving CAD/CAM/CNC Technology.

SR. NO.9.1 -ENGINEER  ( Electronics / Electrical )

Qualification : Essential : Degree in Engineering (Electrical / Electronics /    Mechatronics) or equivalent from recognized

University/Institution.Desirable : PG/PGD in VLSI/Enbedded System/ Mechatronics from recognized Institution.

Experience : Essential : Nil. Preferable : Experience in CNC machines/VLSI/Embedded System/Mechatronics.

SR. NO.9.2-ENGINEER ( Mechanical )

Qualification : Essential : Degree in Engineering (Mechanical / Production / Manufacturing Technology /    Mechatronics/ Automobile) or equivalent from recognized University/Institution.Desirable : PG/PGD in Tool Design/CAD/CAM/CAE/ Mechatronics or Tool Engineering from recognized Institution.

Experience : Essential : Nil. Preferable : Experience in operating machines in Tool Production Including CNC machines/ Mechatronics.

SR.NO.10.1-SENIOR TECHNICIAN (PRODUCTION) ( Electronics / Electrical )

Qualification   :   Essential   :   Diploma   in   Electrical   /   Electronics   /Mechatronics   Desirable   :   Certificates   course   in

VLSI/Embedded System/Automation/Mechatronics from recognized Institution.

Experience : Essential : 2years’ Experience in reputed Tool Room/Industrial Establishment. Experience in VLSI/Embedded

System/Mechatronics. Preferable : Experience in CNC machines/Maintenance of CNC machines.

SR.NO.10.2-SENIOR TECHNICIAN (PRODUCTION) ( Mechanical )

Qualification : Essential : Diploma in Mechanical/Production/Mechatronics with post Diploma in Tool Design/CAD/CAM or Diploma in Tool & Die Making. Desirable : Certificates course in CAD/CAM/CNC/Automation/Mechatronics from recognized Institution.

Experience : Essential : 2years’ Experience as a Tool making in reputed Tool Room/Industrial Establishment with exposure to CNC Program/Planning and Machinery/Tool Tryout, Assembly/Quality Control/Critical Machining, Heat Treatment. Experience in Mechatronics. Preferable : Experience in operation, Programming CNC machines/Maintenance of CNC machines.

SR.NO.11.1-SENIOR TECHNICIAN MAINTENANCE ( Electronics / Electrical )

Qualification : Essential : Diploma in Electrical/Electronics/Mechatronics. Desirable : Certificates course in VLSI/Embedded

System/Automation/Mechatronics from recognized Institution.

Experience : Essential : 2years’ Experience in reputed Tool Room/Industrial Establishment. Experience in VLSI/Embedded

System/Mechatronics. Preferable : Experience in CNC machines/Maintenance of CNC machines.

SR.NO.11.2-SENIOR TECHNICIAN MAINTENANCE ( Mechanical )

Qualification  :  Essential  :  Diploma  in  Mechanical/Production/Mechatronics  Engineering  with  post  Diploma  in  Tool

Design/CAD/CAM    or    Diploma    in    Tool    &    Die    Making.    Desirable    :    Certificates    course    in    CAD/CAM/CNC

/Automation/Mechatronics from recognized Institution.

Experience : Essential : 2years’ Experience as a Tool making in reputed Tool Room/Industrial Establishment with exposure to CNC Program/Planning and Machinery/Tool Tryout, Assembly/Quality Control/Critical Machining, Heat Treatment. Experience in Mechatronics. Preferable : Experience in operation, Programming CNC machines/Maintenance of CNC machines.

Application must reach to THE DEPUTY GENERAL MANAGER, MSME TECHNOLOGY CENTRE, ROHTAK, Plot No.10&11, Sector 30 B, IMT, Rohtak 124021, Haryana latest be 27.09.2022. Late applications will be summarily rejected. MSME 

Technology Centre, Rohtak reserves the right to reject any application, increase or decrease number of posts without assigning any reason thereof.

PERKS & ALLOWANCES: These posts besides pay band carry attractive fringe benefits such as Dearness Allowance, House Rent Allowance, Transport Allowance, LTC, PF, Gratuity, Group Insurance, Medical Reimbursement facility,etc.

HOW TO APPLY : The Interested Candidates should send their bio data as per the format available at website www.msmetcrohtak.org along with self attested copies of certificates for the above post(s). Single format shall be used for applying  for  Single  post only. In case  applying  for more  than one  post then  separate  format/form  to  be  used.  The candidates belongs to OBC category must enclosed the copy of the certificate from the competent authority certifying that he does not belong to Creamy Layer Category. Incomplete application will be rejected. If information provided is found false at any stage the candidature will be liable for rejection. Persons working in Govt. and Quasi Govt. or Public Sector undertaking should apply through proper channel with an advance copy. Please write on the envelope name of the post applied for. The centre reserves the right to short list and call limited number of candidates for test/interview.